Moffat Heating & Plumbing
07817 203589
The following articles were authored by Ben

Tackling cold or luke warm radiators on Oil-fired heating systems

The first thing to determine is where the radiator is cold. This will help to identify where the problem is…

Radiator cold at the top

The top being cold indicates that air has been trapped in the radiator. This can be remedied by bleeding the radiator. (See my other home help). Note, air in the system can be a symptom of an underlying problem which may need to be addressed.

Radiator cold at the bottom

If the radiator is cold at the bottom, then the likely cause is ‘sludge’. This would require the radiator and more than likely the heating system to be cleaned. This can be done chemically and/or manually. A cleanser is added to the system for between 2 hours and 2 weeks and the system rinsed through. Occasionally, the radiator may need to be taken off and flushed through manually with mains pressure water.

If the sludge build up is particularly bad, then the heating system will need to be ‘power-flushed’. Note, whenever water is drained from the heating system, it will need a suitable amount of system inhibitor added to ‘top up’.

Radiator completely cold

If the radiator is completely cold, then then the valves may be turned off or stuck or you may have an air lock somewhere in the system. This may warrant inspection by a qualified professional.

Spring – The Perfect Time For a Boiler Service

oil-boiler-serviceAs summer approaches and the bitter cold nights of the winter disappear from our mind so do our thought move from our heating to the sunny delights of Bermuda shorts and ice lollies. Spring and summer is the ideal time to have your boiler serviced and/or have work carried out on your heating system. The benefits of having heating work carried out in these months include:

1 -The greater availability of your OFTEC registered engineer (winter months tend to see us busy with breakdowns and emergency boiler replacements).

2- A service can identify potential remedial work and system upgrades which can then be carried out when the need to have the heating turned off won’t affect the household to the degree that it would do during the winter.

3- External Oil boilers should ideally be worked on in the dry as water and electrics don’t mix. Many winter services are called off due to unsuitable weather conditions, i.e. rain leading to a new appointment having to be scheduled.

4- Many engineers increase their prices during the winter months. (NOT US!)

Save money with oil clubs

save-money-heating-oilBuying heating oil in bulk from an oil supply company can be expensive. What oil clubs provide is a means of pooling together a group of people who can negotiate a better price for their oil.

Check if your village has an oil club, you may find this information in the local newsletter/magazine or at your local post office.
Agricole oil can also direct you to their oil buying club if they have one in your area.

Wrap your pipes and save money

insulated-pipePeople tend to forget about the simplest, most inexpensive ways to save money. Simply insulating pipes where they are exposed to extreme conditions will help prevent burst pipes and stop heat loss where it is not wanted.

‘Fibre- glass’ insulation can be used to insulate loft spaces, preventing unnecessary heat loss into the loft space. Double glazing of windows, though initially expensive will save you money and improve the value of your property.

A quick look at three types of shower for your bathroom

Showers in the bathroom have become the modern luxury that we really don’t think about. We using it everyday but only really think about them when they go wrong or we want a new one fitted. What sort you have fitted depends on your existing plumbing and your needs.

The main types of shower appliances

  • Electric showers
    electric-shower
    These are supplied by a single 15mm water pipe and an electrical cable, they work in a similar fashion to a kettle and come in a variety of power options.
  • Power shower
    Power-Shower
    Quite often confused with the electric shower, these are supplied by two water pipes and an electrical, they contain a pump within their valve which increases the pressure of the water.
  • Mixer shower
    Thermostatic-Mixer-Shower_large
    These are supplied by two water pipes and use the tanks in the loft to supply the pressure, or alternatively a combi-boiler. These can, where the situation allows have a pump fitted to increase the pressure.

 

The shower fitted needs to be suitable for the hot water system you have, for example, if you have cold mains water to your shower and a tank fed hot water supply you would require a thermostatic shower mixer valve to make eliminate the risk of scolding.

Electric showers need the correct size of cable in relation to their output.

Showers can also be incorporated as part of your bath taps but care needs to be taken as the cold and hot water supply can be at differing pressures. Make sure you take advice.

How do I get rid of limescale build up?

There are many products on the market that deal with limescale build-up which can be bought from most plumbers merchants and D.I.Y. stores. Vinegar works well on taps as does lemon juice.

Caustic soda can be used in extreme circumstances, but make sure you are very careful and wear gloves and goggles. Do not use with bleach!

If in doubt, call us with details and we will help you sort out the problem.

My stop-cock doesn’t turn off the water, what should I do?

stop-cockFirst, locate your outside shut-off valve. This is normally located between the road and the property boundary. Use this in an emergency.

Next, it is prudent to call out a plumber to replace the stop-cock in your property.

Generally, this is a relatively inexpensive job and potentially could save you thousands of pounds should you have a leak and are unable to turn off your water supply quickly.

You can help your plumber by describing the position of the stop-cock (under the sink? in the bathroom? in the hall?), the type of stop-cock (colour and material) and any other labelling or markings. All this information helps as they will have a better chance of bringing the right item on the first visit.

Heating controls

Programmers

Set your programmer to control both your heating and hot water heating times to suit you and your  lifestyle. If you are out during the day, only have it come on in the morning and in the evening.

Room thermostat

These should be positioned where they won’t be affected by adverse heat/chills from fires, radiators, cat-flaps e.t.c.

Thermostatic radiator valves (T.R.V.)

These are located (if you have them) on one side of your radiators. These control the temperature of your rooms individually. They generally have numbers (1-5) or roman numerals (i-v) on the head. Set these midway to start with and adjust as uyou feel a room needs more or less heat.

Advice for going on holiday

When going away for extended periods of time, try to arrange for a trusted relative or friend to ‘pop in’ to check on your house. Ensure he or she knows where the main stopcock is. If in doubt, call us so we can show you where everything is before you go. Give our number to your friend and if there is a problem we will be aware of where things are and sort problems quickly.

In cold weather, set your heating to come on twice a day, once in the morning and once last thing at night, just for an hour or two to prevent freezing of pipes.

Waste outlets

If a bath, shower, sink or basin appears to take a long time to drain, it could be blocked. Remove blockage before it becomes a major issue. The trap beneath the sink is designed to capture unwanted items. However, if it’s not checked then a blockage can form.

Never put waste oil, such as pan fat, down the drain as this will quite quickly block up your sink!

If you think you have a blockage then please don’t hesitate to call!