Moffat Heating & Plumbing
07817 203589
The following articles were authored by Ben

Pipes and cold weather

Prevention is better than cure here. Frozen pipes can easily become damaged, leading to leaks when they unfreeze. Ensure any pipework exposed to freezing conditions is properly insulated. Insulate any tanks in loft spaces.

If you have an outside tap, isolate it during the cold weather. To do so, turn off  the isolation valve to the outside tap and open it until it runs dry.

If you are in doubt, please call us as soon as possible

Hard water

If you live in a hard water area, your plumbing systems are more likely to be affected by limescale. Use a suitable limescale remover to prevent the problem becoming expensive, washing machines can be damaged in this way.

Make sure you have the relevant system inhibitor in your heating system (Please check your system can have this as some types of system don’t allow an inhibitor to be added).

If you have the budget and the space a water softener is a good idea.

For advice and more, please contact us and we will arrange a visit.

Keep an eye on your pipes and hoses

The flexible hoses on appliances such as dishwashers and washing machines should be checked annually. Make sure there are no drips which could develop into something more serious if left. Check for cracks and any sort of wear and tear on the hoses themselves.

If in any doubt, please call us and we can pop round and check it out for you.

Looking after your boiler

It is always best to get your boiler serviced annually. If it’s a gas boiler, this needs to be done by someone who is registered with Gas safe to work on gas boilers. Be aware that an engineer needs a seperate ticket to work on L.P.G. boiler.

If it’s an oil boiler, look for an engineer with good references. The OFTEC website will have a list of engineers who have trained to service boileres, unlike gas however, there is no legal requirement to undertake this training before carrying out a service.

Do not undertake any servicing yourself, always use a professional!

 

Checking your taps, stopcocks and valves

Find out where your mains water ‘stopcock’ valve in your house is located. Make sure your valve turns fully off, if it doesn’t turn off fully, get it replaced.

Find out what each valve in your house does, label them if necessary and make sure they all work. Do not try to adjust a valve if you don’t know where it leads to.

Check valves once or twice a year to make sure they turn on and off, this will stop then from seizing up.

Deal with dripping taps and valves as they appear. Once a washer starts to wear it won’t get better on it’s own!