Moffat Heating & Plumbing
07817 203589
The following articles were authored by Ben

Oil Tank Checks – Help Your Service Engineer

Dangerous oil tank platform

An illegal and dangerous oil tank arrangement

As the owner, you can help your service engineer by keeping clear the area around the tank so that a visual inspection can be carried out. This allows any potential weak points in the tank, such as rust or leaks, to be spotted early.

An oil storage tank should be checked when the annual service is carried out.

A base that is too small can prove to be both an environmental hazard and a fire hazard. It is important that this can be checked to allow remedial work to be suggested and carried out if possible.

Helpful Local Numbers In Case Of An Emergency

alertIt’s best to plan ahead for when things go wrong, so ensure you know where the water, gas and electricity off taps and switches are. In the case of an emergency, for example – an inside broken water pipe – turn off your water and get in touch with us. If it’s an external water pipe then get in touch with the local water supplier.

You can call the following numbers in an emergency.

  • Gas safe (England) – 0800 111 999
  • O.F.T.E.C. – 0845 65 85 080
  • Anglian Water – 03457 145 145 (emergency)
  • Anglian Water – 0800 771 881 (reporting a leak)
  • British Gas – 0800 111 999 (This is a 24 hour emergency line)
  • Electrical , UK Power Networks 0800 783 8838

Plumbers in the movies

fatty-arbuckleNot considered the most glamorous profession,plumbing engineers have still managed to appear in several movies over the years. One of the first films was directed by real life plumber/handyman Fatty Arbuckle. “Ex-plumber” came out in 1931, just two years before his death in 1933.

Other notable films with plumbers as big characters include:

“Carry on cowboy” sees Jim Dale playing Marshall P Knutt taking on Sid James ‘The Rumbo Kid’ after being mistaken for a US peace marshall.

“Bound” sees ex-con Gina Gershon team up with Jennifer Tilly to steal millions of dollars from the Mafia.

“Rammbock (Siege of the dead)” sees young apprentice plumber Harper teaming up with Michael and a few other residents in an escape plot from their zombie-infested apartment block.

“Kenny”- Possible the most famous (and only) film involving a portaloo plumber in Australia. A documentary film crew follow our hero Kenny on his day to day dealings with customers, kid, ex-wife and father. A wonderful film.

Start Your Career As A Plumber If You Want Fame And Fortune!

michael-cain-as-a-plumber

Being a plumbing and heating engineer is a great job and career. It’s also gives a great start in life if your aim is fame and fortune! Here’s a few famous name who started out in the trade…

Zinzan Brooke:

After serving his apprenticeship, Zinzan juggled his pipe fiddling with his true passion, egg chasing. Unfortunately for the world of plumbing and anyone on the end of a Zinzan Brooke tackle Zinzan decided to go professional as a rugby player. A very talented forward, he is considered one of the all time great Number 8’s. 58 caps for the All Blacks plus numerous non test match internationals attest to this.  Now retired from the rugby world, he runs a Bed and Breakfast in Windsor with his wife.

Charles Dance OBE:

The legendary actor, star of films such as The Golden Child, Alien 3 and many R.S.C. productions, in an interview Charles described his worst ever job as a plumbers mate. Maybe he was upset at not being allowed to solder pipes!!

Screaming Lord Sutch:

It’s often been said, you have to be mad to be a plumber.. well..David Edward Sutch was such a man. In the 1950’s before he became a well loved politician, young Edward was an apprentice plumber. The career wasn’t for him, with aspirations to be a musican Screaming Lord Sutch left the trade for a life of rock and roll. and politics! He never forgot his roots, often performing with a toilet seat around his neck he also campaigned for heated toilet seats for pensioners. An interesting figure, who left us for the great ballot box in the sky in 1999.

 Michael Flatley:

Following his father into plumbing, Michael took his plumbing career further than most of our other famous plumbers, even setting up his own business. It wasn’t treading his father’s footsteps which made him millions and Michael decided jumpy leg only dance moves on an epic scale was his real passion.

Michael Caine:

Between serving in the Korean war and acting, Michael served time on the pipes as a plumbers assistant (mate). Not a lot of people know that!

Sir Thomas Finney, C.B.E.:

Before being allowed to sign for Preston North End, a young Thomas served his plumbing apprenticeship in the family’s plumbing business. Often described as one of England’s greatest footballers, Sir Thomas Finney sadly passed away earlier this year. Preston’s and Thomas’s status was such that they were referred to as ‘The Preston plumber and his ten drips’.

Honourable mention:

Albert Einstein: “If I could do it all again, I’d be a plumber“

5 Simple Tips To Prevent Fat Blocked Pipes

 

sink-drian-fat-block

Every year I get dozens of call-outs to blocked sinks, basins and baths. Not a nice job for the plumber and not always that cheap for the householder.

Fat drained from fried food, for example, when cooled will return to it’s solid state. This will mix with food pieces, hair and all manner of other things and lead to blocked waste traps and pipes.

Not only does this block your pipes but it also helps to create blockages in the main sewer pipes under our towns and cities. This is costing the tax payers millions per year, something that Burton-on-Trent knows about as it’s the worst for blocked drains.

There are several things we as home owners can do to help prevent this.

  • Only flush normal human waste and toilet paper
  • Tampons, face wipes, sanitary towels and ear buds should all go in the black bin.
  • Drain cooking fats into your black bin.
  • Be aware of ‘industrial strength’ sink un-blocker. Some products will ‘burn’ through your plastic pipes!
  • Buy a sink strainer to collect long hair and food bits. Then empty this into your black bin

The Dangers Of Running Out Of Heating Oil

Running out of oil for your heating system can prove costly for several reasons

  • The inconvenience of no heating or hot water.
  • The cost of calling out your heating engineer.
  • Potential remedial work to your oil boiler and oil-line.

 

When you get low on oil in your tank, you start to draw through the ‘muckier’ oil at the bottom. This can block the oil filters on your oil-line, your pump and your nozzle.

  • This will mean either the replacement of filter elements and/or the cleaning of the elements.
  • The oil pump may require dismantling which can then lead to trouble re-assembling necessitate new ‘O’ rings or even a new pump.
  • The oil pump, if run dry by, for example pressing the reset button too many times (manufacturers recommend no more than twice.) then a new pump may be required.

 

What to do if you are running low on heating oil

If you think you are running low on heating oil check your tank, my preference is to use a clean dipstick. Once you have determined a low level of oil in your tank you need to order some more.  If your oil delivery can’t be made for a few days there are several ways you can ration your oil usage.

  • Use your immersion heater for Domestic Hot Water (D.H.W.).
  • Turn your room thermostat down.
  • Turn off the Thermostatic Radiator valves (T.R.V.) in the rooms where you don’t need them.
  • If you have an open fire (and it’s safe to do so) light a fire. Sometimes it’s cosy snuggling up under a blanket in front of an open fire.
  • Have a shower instead of a bath.
  • Put another layer of clothing on.

 

All of the above points, barring perhaps the immersion heater usage are ways not only to ration your oil usage but also to save money and help save the environment (which will give you a warm feeling inside!)

What is a condensing boiler?

condensing-boilerAs of the 1st of April 2005 building regulations state that any new or replacement Oil boiler needs to be a condensing boiler. Only in exceptional circumstances does this not apply.

A condensing oil boiler is a boiler that re-uses previously wasted heat from flue exhaust gases. They will have a bigger heat exchanger or an additional heat exchanger, which allows the water in the water jacket to extract more heat from the exhaust gases than non-condensing boilers.

As the water vapour cools it turns into water (condenses) and leaves the boiler via a condense pipe (and trap) to a suitable termination point.

Condense water is slightly acidic, between 3-5 PH and thus would ‘rot’ ‘old fashioned’ boilers heat exchangers. Condensing boilers are generally made of stainless steel to prevent this. Whilst not great, the slightly acidic nature of the water is no worse than a lot of fizzy drinks.

Know your Oil Boilers!

There are 3 types of Oil Boilers that can be installed and used as a source of hot water

  1. Combi Boiler (or combination boiler).
  2. Regular Boiler (or traditional/conventional boiler).
  3. System Boiler.

 

Combi boilers provide heating and hot water directly from your boiler whilst regular and system boilers heat your central directly and produce hot water for your domestic hot water cylinder.

Situations where an oil fired combi boiler are best suited include:

  • You live in a flat/bungalow with little or no roof space.
  • You want to convert your loft into an habitable room, requiring the removal of loft tanks.
  • You require hot water ‘on tap’.
  • You have a seperate annex for a family member.

 

Note: The siting of the combi boiler is very important as it loses efficiency when there are long draw offs (pipe runs to taps, showers e.t.c.).

Situations where an oil fired system/traditional boiler are best suited include:

  • You require a system that allows the use of several draw offs (taps, baths, showers e.t.c.) at once.
  • You have low cold mains pressure coming into the property.
  • Your property has bathrooms, kitchens e.t.c. a long distance from each other and/or boiler siting.

 

Before selecting a boiler for installation, it is important to discuss your needs with your OFTEC registered oil engineer. Contact us now and let us help you get the right boiler.

Bleeding Air Inside Oil-fired Heating System Radiators

Bleeding a radiator is a fairly straight forward maintenance job, something you can do yourself with just a few tools. Read through the instructions and get your tools together before starting. If you have any doubt or lack the required tools then please feel free to contact us

Step 1

Turn your heating on and wait for the radiators to get hot. This will help you determine which radiators require bleeding. Those with ‘cool spots’  or that don’t heat at the top will be the ones you need to concentrate on.

Step 2

Turn off the heating. Wait awhile until things cool down a little.

Step 3

To bleed the radiators you will need a good quality radiator key such as the one below.

good-radiator-bleed-keyDo not use the style shown below.

 

bad-radiator-bleed-key

Lay down a sheet or towel under the radiator where you are working.

At the top of the radiator on one end is the radiator vent. You need to attach the radiator key to the square bit at the centre of the valve or insert the flat ended part of the screwdriver into the groove.

Keep a clean cloth in one hand near to the vent, hold the key or screwdriver and slowly turn anti-clockwise. you should start to hear a hissing sound, this is the air escaping.

Once water starts to escape, close the vent by turning the key or screwdriver clockwise.

WARNING:
Do not fully unscrew the radiator vent grub screw! If the valve itself starts to turn, tighten it up and then hold it in place with a spanner.

Step 4

If you have a combi or system boiler or your heating system is pressurised, you may need to ‘top up’ the water pressure in your heating system.. You can do this with the relevant taps at the boiler or the lever valves at your filling loop. (please refer to boiler manufacturers instructions).

My radiator has no bleed valve, what do I do?

Trapped air in your pipes and radiators can cause problems such as unbalanced heating. It’s not always easy to locate the valves to release that trapped air. Not all radiators have a bleed valve on the side of the radiator. Some of the older styles have them on the back of the panel.

radiator-bleed-nipple

Check here first, if this is the case, you may need a special vent key such as the one shown below.

radiator-bleed-valve-tool

 

If there is nothing at the back, then you might have the scenario pictured below, where a plumber or engineer has carried out a repair and left a nipple where the vent should be.

radiator-bleed-nipple

 

If you are ever in doubt then call us for advice!